HWIR900F-1 industrial hot air blower is suitable for heating, drying and dehumidifying industries

保定市中和機械設備制造有限公司成立于2003，擁有專業的研發團隊，集設計開發、制造、服務于一體,為客戶專業設計生產各種熱風、紅外輻射加熱設備生產商。應用范圍及行業： 1、干燥爐內的升溫、加熱、干燥、燒制業。 2、食品、制藥、電子、印刷、噴涂、清洗等行業的加熱。 3、干燥除濕行業、管道吹干洗凈后水滴去除、干燥。 4、熱收縮、熱成型、粘膠活化、預熱、表面處理。 5、我公司開發的UV固化箱系統，型號齊全，性能優良。 產品質量是企業的生命，我們始終把質量和信譽放在一位，堅持技術創新，以過硬的專業技術服務行業發展 17325290682

HWIR900F-1 industrial hot air blower is suitable for heating, drying and dehumidifying industries, As well as the heating and heating of large space, the drying of clothes, shoes and utensils,winter heating rooms and other industries, such as heating, thawing, defrosting, drying and dehumidifying industries. Small size, light weight and easy to move. High thermal efficiency, continuous work without interruption, durable and accurate temperature control.

Characteristics of hot air blower:

Heat insulation of hot air blower

Multi fiber insulation cotton insulation, and the strong machine casing makes it safe and reliable,can maintain long-term high temperature work.

Temperature regulation of hot air blower(room temperature ~350 ℃)

The air outlet is equipped with a temperature sensor, so that the machine can adjust the temperature according to needs, and the temperature control accuracy is 1℃.

Term ordering detection function (preventing fan reversal)

This machine control system is equipped with motor item ordering sequence detection function.If the item ordering error,the item ordering warning indicator lights up.

Remote open control

This machine has a remote control interface, which can control the start and stop of the machine remotely.

Fan delay function

In order to protect the heating core and prolong the service life of the heating core, the machine has a time delay function of downtime and blow drying. After the machine stops working, the hair dryer will blow off for a minute before it can be shut down.

High heat exchange efficiency

Ingenious design of wind tunnel let the air uniform through the inside and outside of the helical heating wire.Heat exchange near ,the loss of wind pressure is less.The heating core of the hot air machine is designed to use the lower surface power density, and the heating temperature in the unit area is low, so the electric heat wire has a long service life.

Air flow regulating valve

The air inlet of the blower is equipped with a manual air volume regulating valve, and the air volume can be adjusted according to the needs.

Security

It has overheating overload protection, power cut protection device, emergency stop switch, phase sequence protection, fully guarantee the safety of the equipment, do not produce exhaust gas, and meet the environmental protection.This machine can operate continuously for 24 hours all around the year.

 

本頁產品地址：http://www.lgsztm.com/sell/show-8841209.html