High-low temperature & humidity alternating test chamber

    常州正德試驗設備有限公司是由試驗行業知名老牌制造商——金壇環境試驗設備廠，投資三千余萬元建成。公司已從事人工環境試驗設備行業二十余年，擁有分銷商三百余家，累計制造各類試驗設備兩萬余臺，并成功出口美國、歐洲、東南亞，其中還包括烏克蘭軍工企業。經過長期的積累與沉淀，公司產品設計合理，工藝成熟，皮實可靠。

High-low temperature & humidity alternating test chamber

This series is applicable for the testing of the spaceflight and aviation products, information electronic instruments and meters, materials, electrical and electronic products, and electronic and electrical components and parts in high-temperature, low-temperature, humid and heat environment.

 

Features

 

l         Material of the frame is SUS304 stainless steel and A3 steel plate sprayed with plastic.

l         Observing window is set on the chamber door.

l         Large-size LCD display screen, simple operation, easy programming.

l         PID auto tuning function with fault information display.

l         With LAN, USB and software communications interface, the optional logger, rechargeable strong.

l         Double-layer high-temperature resistant and high-intensity seal is equipped between the door and the working room to ensure fine heat preservation.

l         High-quality fixable PU moving wheel is adopted on the bottom of the test chamber.

l         A test hole with 25mm, or 50mm or 100mm diameter is set on the left side of the chamber body.

l         Independent heating system, refrigeration system and humidifying system.

l         Heating, cooling, humidification and dehumidification system is completely independent to improve efficiency, reduce testing costs, increase life expectancy and reduce the failure rate.

 

Mode

TS-TH80

TS-TH100

TS-TH150

TS-TH225

TS-TH408

TS-TH800

TS-TH1000

Temperature  range

A:0～150℃    B:-20～150℃   C:-40～150℃   D:-60～150℃   E:-70～150℃

Humidity range

20%～98%RH

Temperature fluctuation

±0.5℃

Humidity fluctuation

±1.5%RH

Temperature Control accuracy

0.01℃

Humidity Control accuracy

±0.1%RH

Temperature Rise/fall speed

0.7℃~1.2℃/min.                                 （Non-linear, non-load）

Workroom dimensions D*W*H(cm)

40*40*50

40*45*55

50*50*60

50*60*75

60*80*85

80*100*100

100*100*100

Exterior  Dimensions  D*W*H(cm)

88*93*157

88*103*157

98*103*172

98*113*187

108*133*197

128*153*212

148*153*212

The standards it meets

GB、GJB、IEC、ISO、ASTM、UL…

■Control system:

TEMI880 touch-key type temperature and humidity programmable controller

Operating interface: LED display

Temperature and humidity controller: touch-type LED controller 

Setting mode: touching type

Running mode: setting-up running and programmed running

Program: 100 groups in 1000 sections

Resolution: temperature: ± 0.1 ℃; humidity: ± 1%RH

Input: platinum thermal resistance

Control mode: PID control

Communication function: LAN network interface

Additional function: alarm and display function, power-off protection function, upper limit temperature alarm function, timing function (auto startup and auto stop), self-diagnosis function, curve record and display function, paperless record, USB data export, tele-monitoring and so on.

It can execute 100 STEP X 10 PATTEM mode

Each section can be grouped and executed in crossing way.

The execution time for each section can be set up between 0-999H plus 59min.

For setting up for each group, it can circulate within 1-999 in part or entirely for option.

In execution, it can selec group circle picture or section execution picture and can know the remaining time for execution.

It has power-off function. After power recovery, it can complete the remained test.

It can selec single-section control or multi-section programmable control.

The screen has backlight time control function and it can adjust the backlight brightness. For executing single-section control, it can change the execution value at will. The memory-type multi-function control has automatic control output functions, such as heating heater and humidifying heater for electromechanical solenoid valve for different groups of refrigerating compressors and so on.

■Safety device

Humidifier dry-combustion protection, independent over-temperature protection, water shortage protection, over-current protection, refrigerant high-pressure protection switch, over-current circuit breaker, earth leakage protection and so on.

 

 

■Operation ambient temperature:

Temperature：5℃～35℃

Relative humidity：≤85%

Atmospheric pressure：86kPa～106kPa

本頁產品地址：http://www.lgsztm.com/sell/show-4400486.html