分體式結構設計，操作方便，按新國標GBl9758-2005技術要求研制；
采用內置全流式取樣技術，專用測量摩托車急加速、怠速工況時的煙度；
高亮度數碼顯示，進口關鍵零部件組裝而成；
采用全流式耐高溫的特殊取樣探頭，采樣穩定、、方便；
開機預熱時間10分鐘，并自動調零；
數據自動線性化處理，可顯示不透光度N、光吸收系數K；
出現故障時自動顯示故障代碼；
附有自動時鐘顯示，內置打印機(RS—232或模擬接口聯網)供選擇。

主要技術參數：

測量范圍      不透光度N:  0～

              光吸收系數K:0～90.65m-1

示值誤差      ≤±2%

穩定性        自動校零，量矩漂移≤±1%/4h

分辨率        0.1%

響應時間      1S±0.1S

輸 輸出方式      LED(4位)顯示，可附打印機，打印出5組急加速煙度、怠速煙度、光

                吸收系數的zui大值及平均值，測試時間、日期等，可附接口與計算機

                聯網

環環境條件      溫度0～40℃，相對濕度≤90%

電電源          AC100-240V   50/60Hz 消耗功率150VA

外外形尺寸      控制單元：250mm(長)×310mm(寬)×170mm(高)

                測量單元：350mm(長)×260mm(寬)×170mm(高)

重重量          控制單元：4kg，

                測量單元：5kg

Main Features:

◆Separated structural design, easy to operate, according to the new national standard GBl9758-2005 technical requirements for development.
◆With built-in full-flow sampling techniques, application-specific measurement of motorcycle hard phases of acceleration, idle condition when the smoke.
◆High-brightness digital display, import key components assembled.
◆Using a special full-flow high-temperature sampling probe, sampling a stable, accurate and convenient.
◆Ji machine warm-up time 10 minutes, and automatic zero adjustment.
◆Linear automatic data processing, can be displayed opacity degrees N, light absorption coefficient K.
◆Fails automatically displays fault code.
◆With automatic clock display, built-in printer (RS-232 or analog interface network) for selection.

Main technical parameters:

Test Scope：No light transmission N: 0～

Light absorption coefficient K: 0～90.65 m^-1
Shows the value error：≤ ± 2%
Stability：Automatic zero, volume moments drift ≤ ± 1% / 4h
Resolution：0.1%
Response Time：1S ± 0.1S
Output Mode：LED (4-bit) display can be attached to the printer 5 groups hard phases   

of acceleration smoke, idle smoke, the light absorption coefficient of

the maximum and the average test time, date, etc., can be attached to

interface with the computer network
Environmental conditions：Temperature -5 ~ 50 ℃, relative humidity ≤ 90%
Power：AC100-240V  50/60Hz Power consumption 150VA
Dimensions：Control Box::：240mm (L) × 310mm (W) × 170mm (H)
                     Flue Box：350mm (L) × 260mm (W) × 170mm (H)
Weight：Control box: 4kg, flue box: 5kg