GDS-3152	GDS-3154	GDS-3252	GDS-3254	GDS-3352	GDS-3354
Vertical
Input Channels	2Ch+EXT	4Ch+EXT	2Ch+EXT	4Ch+EXT	2Ch+EXT	4Ch+EXT
Bandwidth	DC~150MHz(-3dB)		DC~250MHz(-3dB)		DC~350MHz(-3dB)
Rise Time	2.3ns		1.4ns		1ns
Vertical Resolution	8 bits
Vertical Resolution@ 1MΩ	2mV~5V/div
Vertical Resolution@ 50/75Ω	2mV~1V/div
Input Coupling	AC, DC, GND
Input Impedance	1MΩ// 16pF
DC Gain Accuracy	±(3% X |reading| + 0.1div+ 1mV)
Polarity	Normal and inverted
Maximum Input Impedance @1MΩ	300V (DC+AC peak), CAT I
Maximum Input Impedance @50/75Ω	5 Vrms ,CAT I
OffsetPositionRange	2mV/div ~ 100mV/div: ±0.5V 200mV/div ~ 5V/div: ±25V
Bandwidth Limit	20MHz (-3dB)		100MHz (-3dB)		200MHz (-3dB)
Waveform Signal Processing	Addition, Subtraction, multiplication, division, FFT, FFTrms
Trigger
Source	Dual channel: CH1, CH2, Line, Ext ; 4 channel: CH1, CH2, CH3, CH4, Line, Ext
Trigger Mode	Auto (Auto (supports Roll Mode for 100 ms/div and slower), Normal, Single
Trigger Type	Edge, Pulse Width, Video, Runt, Rise & Fall, Alternative, Event-Delay (1~65,535) events, Time-Delay(10nS~10S), I2C, SPI, UART
TriggerHold-off Range	10ns~10s
Coupling	AC, DC, LF rej, HF rej, Noise rej
Sensitivity	DC~50MHz approx. 1div or 1.0mV 50MHz~150MHz approx. 1.5div or 15mV 150MHz~350MHz approx. 2div or 20mV
EXT Trigger
Range	±15V
Sensitivity	DC~150MHz pprox.100mV 150MHz~250MHz approx. 150mV 250MHz~350MHz approx. 150mV
Input Impedance	1MΩ±3%, ~16pF
Horizontal
Range	1ns/div~100s/div (1-2-5steps); ROLL: 100ms/div~100s/div
Pre-Trigger	10div maximum
Post-Trigger	1,000div
Accuracy	±20 ppm over any ≧1 ms time interval
Signal Acquisition System
Real Time Sample Rate	2.5GSa/s	5GSa/s	2.5GSa/s	5GSa/s	5GSa/s	5GSa/s
Equivalent Time Sample Rate	100GSa/s maximum for all models
Record Length	25k points
Acquisition Mode	Normal, Average, Peak Detect, High resolution, Single
	Normal: Acquire sampled values
	Average: From 2 to 256 waveforms included in average
	Peak Detect: Catches glitches as narrow as 2ns at all sweep speeds
	Hi Res: Real-time boxcar averaging reduces random noise and increases vertical resolution
X-Y Mode
X-axis input	Channel 1; Channel 3
Y-axis input	Channel 2; Channel 4
Phase Shift	±3° at 100kHz
Cursors and Measurement
Cursors	Amplitude, Time, Gating available
Automatic Measurement	28 sets: Vpp, Vamp, Vavg, Vrms, Vhi, Vlo, Vmax, Vmin, Rise Preshoot/ Overshoot, Fall Preshoot/Overshoot, Freq, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle, Phase, eight different delay measurements (FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF)
Cursors Measurement	?V, ?T
Auto Counter	6digits, range from 2Hz minimum to the rated bandwidth
Power Measurements (optional)
Power Quality Measurements	VRMS, V Crest Factor, Frequency, IRMS, I Crest Factor, True Power, Apparent Power, Reactive Power, Power Factor, Phase Angle.
Harmonics	Freq, Mag, Mag rms, Phase, THD-F, THD-R, RMS
Ripple Measurements	Vripple, Iripple
In-rush Current	First peak, second peak
Control Panel Functions
Autoset	Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo autoset
Auto-Range	Allows users to quickly move from test point to test point without having to reset the oscilloscope for each test point
Save Setup	20 sets
Save Waveform	24 sets
Display System
Display Brightness	Adjustable
Interface
RS-232C port	DB-9port
USB port	2 sets USB 2.0 high-speed host port; 1setUSB 2.0 high speed device port
Ethernet	RJ-45 port, 10/100Mbps
VGAVideoPort	DB-15port, SVGA monitor output
Line Output	3.5mm stereo output jack for Go/NoGo audio alarm
GPIB(Optional)	USB to GPIB converter
Go/NoGo BNC	Maximum 5V /10mA TTL open collector ouput
Kensington Style Lock	Rear panel security slot connects to standard Kensington style lock
Power Source
LineVoltageRange	AC 100V ~ 240V, 48Hz ~ 63Hz, Auto selection
Miscellaneous
Multi-language Menu	Available
On-line Help	Available
Time clock	Time and Data ,Provide the Data/Time for saved data
Dimensions and Weight	400(W) x 200(H) x 130(D), approx. 4 kg.

使用手冊一本，電源線一條
GTP-151R: 150MHz(10:1/1:1) 可切換被動探棒，用於GDS-3152/ 3154 (一通道一條)
GTP-251R: 250MHz(10:1/1:1) 可切換被動探棒，用於GDS-3252/ 3254 (一通道一條)
GTP-351R: 350MHz(10:1/1:1) 可切換被動探棒，用於GDS-3252/ 3254 (一通道一條)

選購配件

GTC-001	設備車，450(W) x 430(D)mm (120V 輸入插座)
GTC-002	設備車，330(W) x 430(D)mm (120V 輸入插座)
GTL-110	測試導線，BNC至BNC接頭導線
GTL-232	RS-232C纜線，9-pin母接口對9-pin母接口，Null Modem for computer
GTL-242	USB 1.1纜線，A-B 型，4P，1800mm
插動探棒	GDP-025: 25MHz 高電壓插動探棒 GDP-050: 50MHz 高電壓插動探棒 GDP-100: 100MHz 高電壓插動探棒
電流探棒	GCP-530: 50MHz/ 30A 電流探棒 GCP-1030: 100MHz/ 30A 電流探棒 GCP-206P: 電源供應器以支援電流探棒 (2個輸入通道) GCP-425P: 電源供應器以支援電流探棒 (4個輸入通道)

 

GDS-3152 150MHz，2通道，彩色 LCD顯示數位儲存示波器
GDS-3154 150MHz，4通道，彩色 LCD顯示數位儲存示波器
GDS-3252 250MHz，2通道，彩色 LCD顯示數位儲存示波器
GDS-3254 250MHz，4通道，彩色 LCD顯示數位儲存示波器
GDS-3352 350MHz，2通道，彩色 LCD顯示數位儲存示波器
GDS-3354 350MHz，4通道，彩色 LCD顯示數位儲存示波器

選購

GUG-001	GPIB至USB轉接器
DS3-SBD	串列匯流排量測軟體: I2C / SPI/ UART (只適合4通道機型)
DS3-PWR	功率量測軟體: 電源品質量測/ 諧波量測/ 漣波量測 (In-rush current)

軟件     產品敘述       韌體更新    15072 K     GDS-3000系列韌體更新v1.09    cn    1.09   2011/4/1 韌體更新    18500 K     GDS-3000系列韌體更新v1.11    en    1.11   2011/6/1 韌體更新    15117 K     GDS-3000系列韌體更新v1.11Beta02    en    v1.11Beta02   2011/6/1 韌體更新    19678 K     GDS-3000系列韌體更新v1.13    en    v1.13   2011/7/12

廣宣工具     產品敘述       Brochure    10413 K     GDS-3000產品宣傳冊(pdf)    cn    v1   2010/9/28

手冊     產品敘述       手冊    4637 K     GDS-3000系列操作手冊    簡中       2011/05/23

銷售工具     產品敘述       datasheet         GDS-3000產品規格表 (pdf)    cn    V1   2010/9/28